Description: If your central heating or irrigation sprinkler system isn't working correctly, it could be down to the solenoid valve. Repair a faulty valve with this 12V DC replacement which is suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications. Features: This is a normally close type electric solenoid valve, power on to open it and power off to close it. Connect to DC 12V voltage and the suggested input current is more than 2A to ensure a stable performance. The high quality zinc alloy valve body would hold a press up to 0.8Mpa and liquid temperature from -10℃ to 100℃. Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications. This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water. Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes. There is an arrow sign on valve showing flow direction, please follow the sign to connect pipes. Specifications: Valve Body: Zinc alloy Input Voltage: DC12V Input Current: >2A Type: NC(Normally Close) Pressure: 0-0.8Mpa Thread Size: 1/2" BSPP (DN15) Flow Orifice: 16mm Liquid Temperature: -10℃~100℃ Suitable for: Non-corrosive oil, water, gas, etc Package Includes: 1 x Solenoid Valve Note: Due to different batches, the wire color might differ from the picture, please take the real one as standard.